Increasingly complex production processes and technological leaps as part of Industry 4.0 call for new solutions for more efficient panel building, including for terminal blocks. With Klippon® Connect, you can successfully master all the requirements of today and tomorrow: Tailored application DIN rails products, universal terminal blocks for DIN rails and process-supporting services offer the right solution for every concept.
Already know what you're looking for? Then use our shortcuts. Or get more detailed information about our products below. The articles of the Orange Selection we always have in stock for you and online in our E-Shop . A carefully selected portfolio of around 1,500 articles, such as feed-through terminal blocks and protective earth (ground) terminal blocks in the color green-yellow. If your order is placed before 3:00 pm, we guarantee that your order will be on its way the very next working day.
Our new catalog for Klippon® Connect terminal block for DIN rails is now available from stock. More than 500 new products are added. Find out our new SNAP IN terminal blocks as well as PUSH IN terminal blocks with wire side entry.
You could directly download the PDF right here:
No matter what industry you are in, terminal blocks for DIN rail play a crucial role in the industry. Which design or color of terminal block and which accessories you need depends on different factors. Whether the size of the wire, the wiring, a particular connection technology or a very special function - you know best what kind of terminal block you need. Our shortcuts take you to an overview of our connection technologies and our universal and application ranges. We'll make it easy for you to find exactly the terminal blocks and other products that you need.
Are you looking for the right connection technology for your control cabinet or switchgear? In conjunction with our modular terminal blocks, we at Weidmüller offer you a wide range of technologies for safely connecting wires, conductors and cables in the switchgear. You can rely upon our innovative solutions such as SNAP IN technology, which allows the direct connection of flexible conductors and wire-end ferrules. Or rely on our proven screw connection in the screw terminals. Whatever you need, we have the solution. Which technology do you prefer? SNAP IN? PUSH IN connection? Screw connection? Bolt connection or tension clamp connection?
DIN rail terminal blocks are the link between your switchgear and the incoming wires from the field. As such, they're indispensable in industry, whatever the sector. However, terminal blocks are as diverse as the sectors in which they are used. From the most common ones such as feed-through terminal blocks to special types of terminal blocks such as terminal blocks with electronic components - in our extensive universal program you will find exactly the terminal blocks you need for your switchgear. Which terminal type is perfect for you?
Are you looking for custom-fit terminal blocks for a specific application? We'll make the search for the perfect terminal blocks as easy as possible. You can search our products not only for specific terminal blocks for DIN rails or connection technologies but also by application type. Naturally, special requirements will need to be met depending on where your terminal blocks are going to be used. Our extensive portfolio includes terminal blocks for all usage areas.
Our work is characterised by innovation and progress. We are true pioneers in the field of control cabinet building / switchgear construction. For example, in 1948, we placed the first plastic terminal block onto the market. We've come a long way since then, and we repeatedly launch product innovations to ensure that you can easily master all of the problems you face. With our innovations in the field of terminal blocks and other products, you'll remain ahead of the curve and be able to meet all of the requirements of Industry 4.0.
Insulated fine-stranded single wires are simply inserted into the connection point, and the connection point snaps shut with a clearly audible click. Contact is established permanently and reliably. To release the connection, press the pusher. It couldn't be faster or easier.
Decentralised systems save space in the control cabinet, but the components have to be installed in small, flat distribution boxes. This leads to new wiring challenges.
The new Klippon® Connect terminal block for DIN rails with lateral PUSH IN connection combine the advantages of PUSH IN and screw connection technology. Wires can be connected without bending radius, without tools This reduces the installation height and increases clarity, as markings and functional areas remain clearly visible even when wired.
Automation in the process industry requires flexible solutions for complex production processes. Your circuit diagrams are no less complex and often undergo changes shortly before the end. With our new range of DCS marshalling terminal blocks you can solve these challenges. Even a „last minute change“ is feasible for you without having to change the wiring you have already done.
Thanks to the single and double-level arrangement of the terminal blocks, combined with the provision of the four basic functions (continuity, disconnect, fuse, ground), you achieve maximum flexibility when connecting your devices wired in the field. We also offer you an alternative to connecting the shield to PE for your potential-free shielding concepts.
The new A2C 150/185... Versions of our high-current terminal blocks are suitable for cross-sections from 25 to 185 mm² and feature the innovative PUSH IN-Power connection technology. This means you can use a single convenient connection system for the entire cross-section range and have consistent access to the wide range of accessories of the Klippon® Connect A series.
When distributing potential from a residual current device to further miniature circuit breakers, the neutral conductor connection between the RCD and miniature circuit breaker must be skipped, depending on the installation device.
Weidmüller phase busbars now support precisely these applications. The three phases of the RCD are bridged here via the neutral conductor connection to the further miniature circuit breakers. The new variants are suitable for distribution of 12 pitch units – i.e. for one RCD plus eight additional miniature circuit breakers. In addition, there are variants for 10 pitch units and correspondingly six miniature circuit breakers.
The practical use of aluminium conductors and in particular the transition to copper conductors often proves to be problematic. With our product portfolio of WPD terminal blocks, you can connect copper and aluminum wires easily and safely.
Clamping blocks and potential distribution blocks (PDB) for DIN rail are suitable for collecting and distributing potentials within sub-distribution boxes and switchgear.
WPD power terminal blocks for power supply with conductor cross-sections up to 300 mm².
With our main line branch terminals (HLAK), you can wire the interior of meter cabinets in accordance with standards.
DIN rails according to DIN EN 60715 are among the few standardized components in control cabinet construction. They are used in almost all industries and serve as a universal carrier for electronic equipment. The Weidmüller portfolio offers a wide range of mounting rail variants with different shapes in various materials.
The new two-tier terminals of the A2T 4 FS and A2T 4 DT series combine up to three functions per terminal. For example, you can choose between "Disconnect, feed through, PE" or "Fuse, feed through, PE" Sensors and actuators can be wired conveniently and clearly on just one terminal block. The potentials can be fused or also disconnected. Cross-connection channels on each level ensure safe potential distribution on the terminal strip.
Our A3T 1.5 three-level terminal blocks with 3.5 mm pitch meet these requirements. Depending on the variant, they each carry a different or a common potential on three levels. For example, up to 60 wires can be contacted and 30 different potentials can be routed on a width of 3.5 cm. Each potential can additionally be cross-connected to the adjacent terminal block via a ZQV. This achieves maximum wiring density.
Increasing automation increases the need to save space in the control cabinet and to work more efficiently. With our A4C 6 terminal block, you get a space-saving solution that meets today's requirements. In addition, you realize a safe and efficient distribution of the current to the power consumers.
Our new AITB modular terminal blocks were specially developed to meet the specific requirements and safety regulations for wiring in building installations. Special features of the A-Series ensure real added value in planning, installation and on-site operation.
Klippon® Connect power feed-in terminal blocks WPD allow for an easy and safe installation of aluminium and copper conductors on a small footprint. A power supply or monotoring connection can also be used as an option. Customers can use the power feed-in terminal blocks WPD, regardless of the conductor material. They can be mounted either directly or on DIN rail TS35.
Whatever industry you come from - with our rail-mounted terminal blocks for the DIN rail and the matching accessories such as screwdrivers or busbars and mounting rails, we offer you complete solutions that meet all your requirements. We are pioneers in the market of switchgear cabinet building and have been convincing customers with our high-quality products for years. Trust in our capabilities and allow our experts to provide comprehensive advice. Together we will find the right solutions for your projects and switchgears